Shenzhen Faster Tech Co., Ltd.
Main products:DVB
Products
Contact Us
  • Contact Person : Ms. Chu Breanna
  • Company Name : Shenzhen Faster Tech Co., Ltd.
  • Tel : 86-0755-83243359
  • Fax : 86-0755-83243359
  • Address : Guangdong,Shenzhen,Rm1009,Block B, FeiYangShiDai Building, HuaFa South Rd.,Futian District
  • Country/Region : China
  • Zip : 518000

poe ethernet injector

poe ethernet injector
Product Detailed
poe over ethernet injector and splitter poe for data transaction and data 2 in 1 poe cable adapter poe cablepoe for data transaction and data 2 in 1poe over ethernet injectorPower over cablePOE Injector and Splitter for Data& Power 2 in 1 Specifications

POE set cable NJECTOR and SPLITTER. Complete set for wide range of network products such as Access Points

POE

The complete Passive Power over Ethernet SET contains two pieces - INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet. Passive Power Over Ethernet SET is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices. Passive Power over Ethernet SET is compatible with most devices available on the market such as D-Link, Linksys, Airlive, Senao, Wline, Micronet, Edimax etc. The devices can be supplied standardly up to 50V. (The power adapter is not included - it is possible to use the power adapter of the powered device as access point, IP camera etc.) Passive PoE`s range is normally form 30-40 metres/100-130 ft (the real distance depends on the power supply, type of cable and powered device). Contains: INJECTOR and SPLITTER. Complete set for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices such as D-Link, Ovislink, Senao, Wline, RouterBOARD, WRAP boards and other devices using passive POE injection.Connector Barrel size is 2.1mm (5.5 x 2.1 mm)Power Pins 4,5 +  and 7,8 -

1. It is very simple to connect a passive PoE.  On the lower part, we connect the EthernetRJ connector of passive PoE to the PC, Hub or Switch and connect the power adapterto the power socket.2. On the opposite end (RJ socket) we connect the Ethernet cable leading to the far end.3. At the far end, we connect the end of the Ethernet cable to the RJ socket and connectthe power connectors and the Ethernet to the powered equipment. The equipment is nowconnected by them.

poe ethernet injector



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.